Skip to content
Free Shipping on $99+
Free Shipping on $99+
MTX UNI-1 AMPLIFIER AND ROLL CAGE SPEAKER KIT

MTX UNI-1 AMPLIFIER AND ROLL CAGE SPEAKER KIT

by MTX Audio
SKU UNI-1-ADDON
$499.95 - $499.95
$499.95
$499.95 - $499.95
$499.95

Looking for an all-in-one kit to pump your jams out on the trail? We've got just what you need: MTX's UNI-1-ADDON or UNI-1-AUX Amplifier and Roll Cage Speaker Kit. It fits all tubes between 1.75" and 2", making it nearly universal. This kit comes with an MTX MUD100-2 amplifier, two 6.5" speaker pods, and all the wiring you need. This kit is compatible with any source-you can choose between RCA, 3.5 mm headphone jack, or Bluetooth connections. Whether you're cruising in a Jeep, UTV, or another machine, these speakers will have everybody rocking and rolling with you. Speakers to Fit Your Cage With this kit, you get two 6.5" weather-resistant speaker pods. They're impact resistant and have integrated RGB lighting for maximum head-turning potential. Thanks to adjustable clamps that mount easily to 1.75", 1.85", or 2" bars, you'll be ready to set the ride's soundtrack without working too hard to install it. Small But Might Amplifier This kit comes with MTX's MUD100-2 amplifier. It's small, but it packs a major punch in the sound department! That small size makes it more convenient for mounting on smaller machines and it's corrosion and weather-resistant for maximum longevity. And 200 watts RMS power is enough to run these speaker pods and then some. All the Wires and Cables You Need MTX includes all the wiring you need to get your speaker pods up and running. You get a power kit to connect the amp to the battery, a stereo cable connector from your source to the amp, and 18 gauge speaker wires. Wiring Kit Includes 3m (9.8') 10 AWG Red Power Cable with ATC Fuse Holder 3m (9.8') 10 AWG Black Ground Cable 3m (9.8') 22 AWG Remote Wire 10 AWG Ringer Terminal 5/16" 10 AWG Ring Terminal 3/16" (2) 10 AWG Spade Connectors 18 AWG Red Butt Connector 30A ATC Fuse

Features

Compact design
Corrosion-resistant circuit board
High and low pass crossovers for use with full-range speakers or subwoofers
High and low-level inputs allow connection to both speaker and RCA input signals
2Ω Stable
2 Channels
Footprint fits most OEM motorcycle radios
Full Range class D topology
Bridgeable
Weather resistant
(2) 6.5" Speaker Pods
2-way
Fits bars between 1.75" and 2"
Internal crossover network
Impact resistant
Integrated RGB lighting

Instructions

Download Instructions for:

Fitment

The MTX UNI-1 AMPLIFIER AND ROLL CAGE SPEAKER KIT fits the following:
RCA Outputs: UNI-1-ADDON uses RCA outputs and is compatible with any RCA source.
3.5mm Jack:UNI-1-AUX uses a 3.5 mm headphone jack and is compatible with MTX 6 Speaker Universal Sound Bar, MTX Universal Bluetooth Receiver/Remote, and MTX AWBTSW Bluetooth Rocker Switch.
Bluetooth:UNI-1-MUDBTRC comes with the MTX Universal Bluetooth Receiver/Remote and is compatible with all Bluetooth-enabled devices

Warranty

For warranty information on MTX audio products, check out MTX's Warranty page

Description

Looking for an all-in-one kit to pump your jams out on the trail? We've got just what you need: MTX's UNI-1-ADDON or UNI-1-AUX Amplifier and Roll Cage Speaker Kit. It fits all tubes between 1.75" and 2", making it nearly universal. This kit comes with an MTX MUD100-2 amplifier, two 6.5" speaker pods, and all the wiring you need. This kit is compatible with any source-you can choose between RCA, 3.5 mm headphone jack, or Bluetooth connections. Whether you're cruising in a Jeep, UTV, or another machine, these speakers will have everybody rocking and rolling with you. Speakers to Fit Your Cage With this kit, you get two 6.5" weather-resistant speaker pods. They're impact resistant and have integrated RGB lighting for maximum head-turning potential. Thanks to adjustable clamps that mount easily to 1.75", 1.85", or 2" bars, you'll be ready to set the ride's soundtrack without working too hard to install it. Small But Might Amplifier This kit comes with MTX's MUD100-2 amplifier. It's small, but it packs a major punch in the sound department! That small size makes it more convenient for mounting on smaller machines and it's corrosion and weather-resistant for maximum longevity. And 200 watts RMS power is enough to run these speaker pods and then some. All the Wires and Cables You Need MTX includes all the wiring you need to get your speaker pods up and running. You get a power kit to connect the amp to the battery, a stereo cable connector from your source to the amp, and 18 gauge speaker wires. Wiring Kit Includes 3m (9.8') 10 AWG Red Power Cable with ATC Fuse Holder 3m (9.8') 10 AWG Black Ground Cable 3m (9.8') 22 AWG Remote Wire 10 AWG Ringer Terminal 5/16" 10 AWG Ring Terminal 3/16" (2) 10 AWG Spade Connectors 18 AWG Red Butt Connector 30A ATC Fuse

Features

Compact design
Corrosion-resistant circuit board
High and low pass crossovers for use with full-range speakers or subwoofers
High and low-level inputs allow connection to both speaker and RCA input signals
2Ω Stable
2 Channels
Footprint fits most OEM motorcycle radios
Full Range class D topology
Bridgeable
Weather resistant
(2) 6.5" Speaker Pods
2-way
Fits bars between 1.75" and 2"
Internal crossover network
Impact resistant
Integrated RGB lighting

Instructions

Download Instructions for:

Fitment

The MTX UNI-1 AMPLIFIER AND ROLL CAGE SPEAKER KIT fits the following:
RCA Outputs: UNI-1-ADDON uses RCA outputs and is compatible with any RCA source.
3.5mm Jack:UNI-1-AUX uses a 3.5 mm headphone jack and is compatible with MTX 6 Speaker Universal Sound Bar, MTX Universal Bluetooth Receiver/Remote, and MTX AWBTSW Bluetooth Rocker Switch.
Bluetooth:UNI-1-MUDBTRC comes with the MTX Universal Bluetooth Receiver/Remote and is compatible with all Bluetooth-enabled devices

Warranty

For warranty information on MTX audio products, check out MTX's Warranty page

Shipping & Returns
Return Policy

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

Eligibility for Returns

To be eligible for a return, your item must be in the same condition that you received it, in its original packaging. You’ll also need the receipt or proof of purchase. Returns are subject to a restocking fee.

How to Start a Return

To start a return, you can contact us at sales@reconrecovery.com. Please note that returns may not be getting returned to the shipper's address. Please wait for a response before shipping your item.

Return Approval

If your return is accepted, we’ll send you an RMA (Return Merchandise Approval) code, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

Contact for Return Questions

You can always contact us for any return questions by calling us at 1-800-359-9397, Monday-Friday 8am-5pm.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / Non-returnable Items

Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

Hassle-Free Returns

There are three instances where Recon Recovery offers free returns on any of the UPS / FedEx ground shipments purchased on our website, as detailed below:

  • If the item sent to you is different or wrong than the listing page, Recon Recovery will send you a prepaid shipping label.
  • If the item shows up damaged in shipping or prior to shipping, Recon Recovery will send you a prepaid shipping label.
  • If you decide the item is not going to work for you, Recon Recovery will send you a prepaid shipping label if you exchange it for an item of equal or greater value.

Note: Free Returns does NOT apply to Freight items.

Exchanges

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days.

Please remember it can take some time for your bank or credit card company to process and post the refund too.

If more than 15 business days have passed since we’ve approved your return, please contact us at sales@reconrecovery.com.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare