Skip to content
Free Shipping on $99+
Free Shipping on $99+
Kawasaki Mule Pro FX/FXT Feeder & Cargo Bumper

Kawasaki Mule Pro FX/FXT Feeder & Cargo Bumper

by Ranch Armor
SKU KB13
$1,949.00 - $1,949.00
$1,949.00
$1,949.00 - $1,949.00
$1,949.00

New Ranch Armor Kawasaki Mule Pro Feeder & Cargo Bumper is a sleek all-in-one must have! Get the best of 3 wolds with one UTV Bumper. 100 pounds of corn, huge upper flat surface for 500+ pounds of cargo and storage, coupled with a meaty bumper to plow through anything! 

We sell a lot of UTV bumpers, and we do a lot of UTV outfits that include a bumper AND a feeder. One of the most common complaints and down-sides we hear about was: the feeder wobbles, it's in the way, it's ugly, it broke the welds on my hitch receiver of bumper. After much trial-and-error we came up with a clean design, and large storage capacity both above (gear) and below (corn/feed). A good bumper and feeder setup will cost you almost a grand, our goal was to be around that price point, BUT with the bonus of getting a large storage rack up above to haul more gear! Not to mention, you don't have to take feeder on or off, and worry about it blocking your view sticking out a mile. 

All of the tread plate (aka diamond plate) is 11 GA or 1/8" thick steel. Construction consists of laser cut/pressed body, welded together. Feeder/trap door has oil-sealed stainless steel hinges. We always use an industrial grade 50/50 powder coat that has a mild texture/mild gloss finish. Worried about feeder components? Don't worry at all, we use only All Seasons Feeder components such as the spinner for quality long-life usage. 

Don't worry about fitment, it bolts right on in-place of factory bumper with factory hardware. 

Ranch Armor Bumpers are 100% Born and Built in Texas. We will never outsource like some of our competition. Support American jobs! 

Kawasaki Mule Pro Feeder & Cargo Bumper Specs:

  • Steel Construction
  • Textured Powder Coat Standard
  • 11 GA Steel Plate Main Body
  • Pressed/bent plate frame for rigidness
  • Direct fitment using factory holes. Uses 5 factory bolts from factory Mule Pro FX/FXT Bumper
  • All-Seasons Spinner Head with wired remote control included
  • Lifetime warranty on construction

****REQUIRES LIFT AND/OR LARGER TIRE SETUP****

Description

New Ranch Armor Kawasaki Mule Pro Feeder & Cargo Bumper is a sleek all-in-one must have! Get the best of 3 wolds with one UTV Bumper. 100 pounds of corn, huge upper flat surface for 500+ pounds of cargo and storage, coupled with a meaty bumper to plow through anything! 

We sell a lot of UTV bumpers, and we do a lot of UTV outfits that include a bumper AND a feeder. One of the most common complaints and down-sides we hear about was: the feeder wobbles, it's in the way, it's ugly, it broke the welds on my hitch receiver of bumper. After much trial-and-error we came up with a clean design, and large storage capacity both above (gear) and below (corn/feed). A good bumper and feeder setup will cost you almost a grand, our goal was to be around that price point, BUT with the bonus of getting a large storage rack up above to haul more gear! Not to mention, you don't have to take feeder on or off, and worry about it blocking your view sticking out a mile. 

All of the tread plate (aka diamond plate) is 11 GA or 1/8" thick steel. Construction consists of laser cut/pressed body, welded together. Feeder/trap door has oil-sealed stainless steel hinges. We always use an industrial grade 50/50 powder coat that has a mild texture/mild gloss finish. Worried about feeder components? Don't worry at all, we use only All Seasons Feeder components such as the spinner for quality long-life usage. 

Don't worry about fitment, it bolts right on in-place of factory bumper with factory hardware. 

Ranch Armor Bumpers are 100% Born and Built in Texas. We will never outsource like some of our competition. Support American jobs! 

Kawasaki Mule Pro Feeder & Cargo Bumper Specs:

  • Steel Construction
  • Textured Powder Coat Standard
  • 11 GA Steel Plate Main Body
  • Pressed/bent plate frame for rigidness
  • Direct fitment using factory holes. Uses 5 factory bolts from factory Mule Pro FX/FXT Bumper
  • All-Seasons Spinner Head with wired remote control included
  • Lifetime warranty on construction

****REQUIRES LIFT AND/OR LARGER TIRE SETUP****

Shipping & Returns
Return Policy

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

Eligibility for Returns

To be eligible for a return, your item must be in the same condition that you received it, in its original packaging. You’ll also need the receipt or proof of purchase. Returns are subject to a restocking fee.

How to Start a Return

To start a return, you can contact us at sales@reconrecovery.com. Please note that returns may not be getting returned to the shipper's address. Please wait for a response before shipping your item.

Return Approval

If your return is accepted, we’ll send you an RMA (Return Merchandise Approval) code, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

Contact for Return Questions

You can always contact us for any return questions by calling us at 1-800-359-9397, Monday-Friday 8am-5pm.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / Non-returnable Items

Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

Hassle-Free Returns

There are three instances where Recon Recovery offers free returns on any of the UPS / FedEx ground shipments purchased on our website, as detailed below:

  • If the item sent to you is different or wrong than the listing page, Recon Recovery will send you a prepaid shipping label.
  • If the item shows up damaged in shipping or prior to shipping, Recon Recovery will send you a prepaid shipping label.
  • If you decide the item is not going to work for you, Recon Recovery will send you a prepaid shipping label if you exchange it for an item of equal or greater value.

Note: Free Returns does NOT apply to Freight items.

Exchanges

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days.

Please remember it can take some time for your bank or credit card company to process and post the refund too.

If more than 15 business days have passed since we’ve approved your return, please contact us at sales@reconrecovery.com.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare