Skip to content
Free Shipping on $99+
Free Shipping on $99+
Can-Am Defender Feeder Storage Bumper

Can-Am Defender Feeder Storage Bumper

by Ranch Armor
SKU CB13
$1,949.00 - $1,949.00
$1,949.00
$1,949.00 - $1,949.00
$1,949.00

The Ranch Armor Can-Am Defender Feeder Bumper is the ultimate utility addition to your UTV. Easily bolt up the most impressive all-in-one front bumper on the market. Large platform up top for: storing gear, animals, corn for the built-in feeder, etc... One of the unique points of our bumper is the pull-through winch design that keeps your factory winch in original location. A channel that bolts in-place inside the feeder hopper goes over the winch cable keeping it out of the way and safe. Feeder holds approximately 50 pounds of corn. Installs in minutes! 

One of the most common complaints and down-sides we hear about bumper/feeder combos was: the feeder wobbles, it's in the way, it's ugly, it broke the welds on my hitch receiver of bumper (Not ours, of course). After much trial-and-error we came up with a clean design, and large storage capacity both above (gear) and below (corn/feed). A good bumper and feeder setup will cost around one thousand dollars when buying individually, our goal was to be around that price point, BUT with the bonus of getting a large storage rack up above to haul more gear! Not to mention, you don't have to take feeder on or off, and worry about it blocking your view sticking out a mile. 

Ranch Armor Bumpers are 100% Born and Built in Texas. We will never outsource like some of our competition. Support American jobs! 

Can-Am Defender Feeder & Cargo Bumper Specs:

  • Steel Construction
  • Textured Powder Coat Standard
  • 11 GA Steel Plate Main Body
  • Pressed/bent plate frame for rigidness
  • Direct fitment using factory holes. Use 4 factory holes on Can-Am Defender front-end to mount bumper. 
  • Inverted Spinner Head with wired remote control included

****REQUIRES LIFT AND/OR LARGER TIRE SETUP****

Description

The Ranch Armor Can-Am Defender Feeder Bumper is the ultimate utility addition to your UTV. Easily bolt up the most impressive all-in-one front bumper on the market. Large platform up top for: storing gear, animals, corn for the built-in feeder, etc... One of the unique points of our bumper is the pull-through winch design that keeps your factory winch in original location. A channel that bolts in-place inside the feeder hopper goes over the winch cable keeping it out of the way and safe. Feeder holds approximately 50 pounds of corn. Installs in minutes! 

One of the most common complaints and down-sides we hear about bumper/feeder combos was: the feeder wobbles, it's in the way, it's ugly, it broke the welds on my hitch receiver of bumper (Not ours, of course). After much trial-and-error we came up with a clean design, and large storage capacity both above (gear) and below (corn/feed). A good bumper and feeder setup will cost around one thousand dollars when buying individually, our goal was to be around that price point, BUT with the bonus of getting a large storage rack up above to haul more gear! Not to mention, you don't have to take feeder on or off, and worry about it blocking your view sticking out a mile. 

Ranch Armor Bumpers are 100% Born and Built in Texas. We will never outsource like some of our competition. Support American jobs! 

Can-Am Defender Feeder & Cargo Bumper Specs:

  • Steel Construction
  • Textured Powder Coat Standard
  • 11 GA Steel Plate Main Body
  • Pressed/bent plate frame for rigidness
  • Direct fitment using factory holes. Use 4 factory holes on Can-Am Defender front-end to mount bumper. 
  • Inverted Spinner Head with wired remote control included

****REQUIRES LIFT AND/OR LARGER TIRE SETUP****

Shipping & Returns
Return Policy

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

Eligibility for Returns

To be eligible for a return, your item must be in the same condition that you received it, in its original packaging. You’ll also need the receipt or proof of purchase. Returns are subject to a restocking fee.

How to Start a Return

To start a return, you can contact us at sales@reconrecovery.com. Please note that returns may not be getting returned to the shipper's address. Please wait for a response before shipping your item.

Return Approval

If your return is accepted, we’ll send you an RMA (Return Merchandise Approval) code, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

Contact for Return Questions

You can always contact us for any return questions by calling us at 1-800-359-9397, Monday-Friday 8am-5pm.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / Non-returnable Items

Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

Hassle-Free Returns

There are three instances where Recon Recovery offers free returns on any of the UPS / FedEx ground shipments purchased on our website, as detailed below:

  • If the item sent to you is different or wrong than the listing page, Recon Recovery will send you a prepaid shipping label.
  • If the item shows up damaged in shipping or prior to shipping, Recon Recovery will send you a prepaid shipping label.
  • If you decide the item is not going to work for you, Recon Recovery will send you a prepaid shipping label if you exchange it for an item of equal or greater value.

Note: Free Returns does NOT apply to Freight items.

Exchanges

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days.

Please remember it can take some time for your bank or credit card company to process and post the refund too.

If more than 15 business days have passed since we’ve approved your return, please contact us at sales@reconrecovery.com.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare